Commit b7f05445c0 has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
@sm0svx sm0svx released this 4 days ago
This release of SvxLink have no single big feature addition but a lot of
smaller ones. Some examples are: AFSK metadata transmission for RF linked
remote receivers, per receiver voter delay adjustment, new module ModuleTrx to
remote control transceivers using DTMF, more flexible announcement
configuration and more.
As usual a number of bugs have been fixed. The full list of changes and more
details can be found in the README for release 19.09. Information on
configuration of new features can be found in the manual pages.
Reported by: portscout
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
This version supports qt5
SvxLink release 17.12 -- 30 Dec 2017
------------------------------------
The biggest news in this release is the initial revision of the SvxReflector
application. The SvxReflector application is meant to be used as a center point
to link SvxLink nodes together. The new SvxLink ReflectorLogic logic core is
used to connect a SvxLink node to the reflector server. One or more logics can
then be connected to the refelctor using normal logic linking.
In addition a lot of smaller feature additions have been made and also a number
of bugs have been fixed. The full list of changes and more details can be found
below. Information on configuration of new features can be found in the manual
pages.
Split out evdev headers (input.h, input-event-codes.h, uinput.h) into their
own port, devel/evdev-proto, and update those to be current with the Linux
4.19 kernel. This is done in order to be able to update the rest of the
FreeBSD input stack, which is forthcoming.
By splititng out the evdev headers we can update them independent of other
updates in v4l_compat, which makes it easier for the graphics team to keep
track of them and keep them updated as needed.
Update devel/libevdev from 1.4.4 to 1.5.9 instead of trying to make it work
with the updated headers. This will be further updated.
Update devel/py-evdev from 0.5.0 to 0.8.1 instead of trying to make it work
with the updated evdev headers.
Update consumers to use devel/evdev-proto rather than multimedia/v4l_compat
as needed, and bump portrevisions.
This is the first step in getting the FreeBSD input stack (libevdev,
libinput and so on) updated to newer versions.
Many thanks to all who have helped out with testing, code and exp-runs.
Apologies if I've forgotten to add any names.
PR: 222905, 217248, (based on, in part), 233787 (exp-run)
Submitted by: Greg V, wulf
Tested by: tcberner, kde
Exp-run by: antoine
Approved by: portmgr (antoine)
Obtained from: FreeBSDDesktop development repo
https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/inputhttps://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/input-ports
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: →https://reviews.freebsd.org/D15540
This will primarily help powerpc64.
For archs where clang is the default compiler, these changes will have no
effect, as the base compiler already has these capabilities (primarily, but
not exclusively, c++-11).
Tested for no-harm on amd64.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
New libsigc++20 requires c++11 (it exposes c++11) so explicitly use -std=c++11
where needed.
Mark as broken a bunch of ports which are not c++11 compatible
The only reason to use post-stage is because the port needs to do
"things" at a later time, like some plist manipulation.
While there, fold post-install in do-install targets when they are
defined.
PR: 214780
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
During the exp-run in bug 208158, it was found that comms/svxlink gives errors
with libc++ 3.8.0 [1]:
/wrkdirs/usr/ports/comms/svxlink/work/svxlink-15.11/src/async/audio/AsyncAudioDe
+viceAlsa.cpp:551:7:
error: call to 'abs' is ambiguous
if (::abs(real_rate - sample_rate) > 100)
^~~~~
This is because abs() is being called with an unsigned argument. Fix this by
casting 'real_rate' to int, since it was assigned from 'sample_rate' anyhow.
PR: ports/209371
Reported by: @dim
This update contains commits so it builds with c++11. This is needed
for the libsigc++20 update to 2.6, which has a hard requirement on a c++11
compiler. As such add USES=compiler:c++11-lib.
PR: 207514
Approved by: hamradio@ (db@)
Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code. Take
care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in
- Fix building for the x32 target without asm modules in
mpi/generic/mpi-asm-defs.h: Use a fixed value for the x32 ABI.
- Fix ARM assembly when building __PIC__
- mpi: Fix a subtle bug setting spurious bits with in mpi_set_bit.
* mpi/mpi-bit.c (_gcry_mpi_set_bit, _gcry_mpi_set_highbit): Clear
allocated but not used bits before resizing.
* tests/t-mpi-bits.c (set_bit_with_resize): New.
- Use internal malloc function in fips.c.
* src/fips.c (check_binary_integrity): s/gcry_malloc/xtrymalloc/.
- pubkey: Re-map all deprecated RSA algo numbers.
- cipher: Fix possible NULL dereference in cipher/md.c for being NULL.
- Fix ARMv6 detection when CFLAGS modify target CPU architecture.
PR: 193264
Approved by: cpm@fbsd.es (maintainer)
- Update to 1.6.1
- Remove some unneeded patches
- Fix pkg-plist
- report configure bug upstream
https://bugs.g10code.com/gnupg/issue1668
- report API breakage downstream and find that MacPorts had the same issue
https://rt.cpan.org/Ticket/Display.html?id=97201
- bump PORTREVISION for dependent ports (approx. 100 ports)
- Thanks to exp-run by antoine@ to find ports that break
- patch ports that would otherwise break
security/shishi with PR 192164 is already committed
[1] devel/ccrtp
[2] editors/abiword
[3] security/p5-Crypt-GCrypt
PR: 191256, 192162 [1], 192163 [2], 192166 [3]
Submitted by: Carlos Jacobo Puga Medina <cjpugmed@gmail.com>
Approved by: maintainer timeout, antoine (exp-run), portmgr (implicit)
ham radio use. The project also includes Qtel, an EchoLink client GUI
application.
WWW: http://sourceforge.net/apps/trac/svxlink/
This replaces the earlier and removed comms/qtel port.
PR: ports/188452
Submitted by: Stephen Hurd <shurd@sasktel.net>
