Commit b7f05445c0 has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
- 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
- Removed compatibility with K&R compilers, which was untestable due
to lack of such compilers.
- New functions
. mpc_log10
. mpc_mul_2si, mpc_div_2si
- Speed-ups
. mpc_fma
- Bug fixes
. mpc_div and mpc_norm now return a value indicating the effective
rounding direction, as the other functions.
. mpc_mul, mpc_sqr and mpc_norm now return correct results even if
there are over- or underflows during the computation.
. mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
infinite part and equals output variable is corrected.
. mpc_fr_sub: Wrong return value for imaginary part is corrected.
Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.
Bump PORTREVISIONS of all dependent ports.
PR: 183141
Approved by: portmgr (bdrewery)
Since rough translation of
http://accc.riken.jp/HPC/HimenoBMT.html says
"Himeno bench is released under LGPL ver2.0."
the original sentence is following.
> 姫éãã³ã㯠LGPL ver2.0 以éã«åºã¥ãã¦æä¾ãã¦ãã¾ãã
.
for evaluation of performance of the calculation
of incompressible flow analysis. This program solves Poisson equation
by Jacobi's iterative method which have many loops
