Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464
sip is installed as sip-${PYTHON_VER}
- py-qt*-demo: Fix packaging with python3, those ports have a python2 pkg-plist
so USE_PYTHON=py3kplist must be used to convert it
PR: 219641
everything at once. Sometime, rename post-install into a options helper
target.
I did not fix ports that were such a mess that I could not figure out
what they really wanted to do. I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.
With hat: portmgr
Sponsored by: Absolight
Do it like we already do in devel/py-qt4-core: call compileall.py with -d so
that the .pyc and .pyo files do not have ${STAGEDIR} in them.
While at it, also call python with -O to generate .pyo files.
Bring in some long overdue updates, some of which are required for us to
later land the PyQt5 ports.
One big change with this update is that the PyQt4 ports now install their
.sip files into share/py-sip/PyQt4 instead of share/py-sip. This way we do
not end up with directories like share/py-sip/QtCore, which are especially
confusing once PyQt5 lands and starts installing files with the same names.
Other noteworthy items:
- PORTREVISION has been bumped on ports depending on devel/qscintilla2
because libqscintilla2.so's SOVERSION has changed.
- graphics/seexpr has been converted to USE_PYQT, as the file it used to
define a build-time dependency on x11-toolkits/py-qt4-gui has moved.
Once again, big thanks to Tobias Berner <tcberner@gmail.com> and Guido Falsi
(madpilot@) for their initial work on these ports as part of the effort to
land PyQt5 into the tree (see D2910 in Phabricator for an earlier version of
the PyQt5 patch set).
PR: 205143
In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.
Ports wishing to depend on PyQt4 ports can now do the following:
USES= pyqt:4
USE_PYQT= foo bar_build baz_run
Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.
Even though this patch touches files in many different ports, the goal is
for it to be a no-op from an end-user perspective (so that the basic
infrastructure is landed before the other, riskier changes): no dependencies
have been changed, PyQt/SIP/QScintilla have not been upgraded and the plists
should remain exactly the same, since PYQT_SIPDIR currently contains the
same value that used to be hardcoded in the plists.
Huge thanks to Guido Falsi (madpilot@) for spearheading most of the work: he
took the initiative to work on PyQt5 and sent D2910 to Phabricator with the
original version of this patch. Tobias Berner (tcberner@gmail.com) later
applied it to kde@'s experimental area51 repositories and did some more work
on it.
r344123 broke it by replacing RUN_DEPENDS with PYQT4_RUN_DEPENDS. The latter
has no meaning, so the port stopped depending on all other PyQt4 ports.
MFH: 2015Q4
* PyQt4 has been updated to 4.11.3.
* QScintilla has been updated to 2.8.4.
* SIP has been updated to 4.16.5.
This update is much smaller than the previous one, as there has been no
further need for clean ups in the ports infrastructure.
Pretty much the entire patch set has been originally contributed by Tobias
Berner, who sent it to the KDE on FreeBSD mailing list. Thanks a lot!
PR: 198016
Submitted by: Tobias Berner <tcberner@gmail.com>
... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.
This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:
- General, belated changes:
* Use OPTIONS helpers wherever possible, stop including
<bsd.port.options.mk> when not necessary, stop checking for
${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
add options such as DOCS and/or DEBUG where they were only checked for.
- QScintilla ports:
* Drop the API option from py-qt4-qscintilla2. It had been broken ever
since staging support was added, and its existence does not make much
sense: QScintilla is a hard dependency regardless of the state of this
option anyway, they all come from the same tarball and the configuration
script assumes the .api file will always be installed.
- PyQt ports:
* The configure.py patch shared by all PyQt ports has been trimmed down to
the minimum. Changes for Qt3 compatibility or for things that are just
not needed anymore have been removed.
* Several post-configure targets in the PyQt ports have been removed, as
they had no effect on the way the ports were built whatsoever.
* In some cases, instead of calling Python's py_compile.py on `ls *.py
*/*.py */*/*.py` to generate .pyc and .pyo files, we just call
compileall.py, which is made for this kind of task.
* The patch + sed hack to build py-qt4-dbussupport has been replaced by
only extracting the dbus/ directory for that port and excluding it from
all others.
* Move the bulk of the code in all Makefiles to bsd.pyqt.mk, like the
non-Python Qt ports do with bsd.qt.mk and the QT_DIST variable. A large
portion of all PyQt Makefiles were very similar and contained a lot of
boilerplate code that can be shared among all of them since they all
come from the same tarball. bsd.pyqt.mk now has a PYQT4_DIST variable
that, when set, automatically sets several common variables and the
do-configure target for a port. This allows us to considerably reduce
the size of all the py-qt4-* Makefiles.
* To make the above possible and also to allow us to use as many OPTIONS
helpers as possible, the ARGS variable is now called CONFIGURE_ARGS.
That's what it was used for anyway.
PR: 191990
- Use plist instead of PORTEXAMPLES, otherwise the package is bogus when
NOPORTEXAMPLES is set
- Use compileall.py to byte-compile installed examples
- Use options helpers
This commit also adds proper staging support to all the ports being updated.
In collaboration with Schaich Alonso <alonsoschaich@fastmail.fm> and
Tomasz Kowalczyk <kowalczfbsd@gmail.com>.
SIP 4.14.3
QScintilla 2.7
PyQt 4.9.6
The area51 repository features commits by jhale and myself.
Changes:
- Trim Makefile header
- Convert to new option framework
OPTIONSFILE must be set using ?= to allow overriding.
PR: 163743
PR: 163744
PR: 163745
PR: 163746
Submitted by: A.J. Kehoe IV (Nanoman) <vOo4vyPj@nanoman.ca>
Along with Qt4 the following ports are updated:
PyQt4 ports to 4.8.1
devel/py-sip to 4.11.2
devel/qscintilla2 to 2.4.5
PyKDE3 to 3.16.7
PyQt3 tp 3.18.2-snapshot-20091119
New ports added:
devel/qt4-declarative
devel/py-qt4-declarative
x11/qt4-graphicssystems-opengl
This release has been contributed by:
Thomas Abthorpe (tabthorpe)
Max Brazhnikov (makc)
Dima Panov (fluffy)
Alberto Villa (avilla)
We'd like to thank Martin Wilke (miwi) for exp-run.
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com
We'd like to say thanks to all helpers, testers and submitters.
devel/py-qt4-help
multimedia/py-qt4-phonon
textproc/py-qt4-xmlpatterns
www/py-qt4-webkit
Update QScintilla2 to 2.3.2, PyQt3 to 3.17.6, PyKDE3 to 3.16.2.
Pass maintainership to kde@FreeBSD.org. Thanks Danny Ricin for his great work.
PR: based on ports/130219
Submitted by: Dima Panov" <fluffy at fluffy.khv.ru>
PORTVERSION. After that the PORTVERSION became 4.foo. Because this is
numerically lower than before, the PORTEPOCH should have been bumped.
Poked by: kris@
PR: 125814
Submitted by: Danny Pansters <danny@ricin.com> (maintainer)
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Configure.py now has a flag to specify component, patch is now simpler
- Update qscintilla2 so version where used
- Use bsd.pyqt.mk
Submitted by: Danny Pansters <danny@ricin.com> (maintainer via private mail)
This package provides the PyQt4 demo and examples.
WWW: http://www.riverbankcomputing.co.uk/pyqt/
PR: ports/109634
Submitted by: Danny Pansters <danny at ricin.com>
