as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
- Bump portrevision of unbroken octave-forge-* ports.
- Bump portrevision of math/dynare which uses library files from octave.
- Mark broken: octave-forge-(database|dicom|optim|fits|linear|linear|optim|
parallel|signal|strings|struct|tisean|video).
- Broken optional dependencies in math/octave-forge to default to off.
- Bump portrevision of math/octave-forge.
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash. Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.
Remove the weak wrappers (make them Linux specific). This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.
[1] 5c2cbfccf9
[2] 2ed5054e3a
[3] 009f5ebb4b
Bump all ports that depend on Qt5.
PR: 234070
Exp-run by: antoine
Approved by: kde (adridg)
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
- 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
- Removed compatibility with K&R compilers, which was untestable due
to lack of such compilers.
- New functions
. mpc_log10
. mpc_mul_2si, mpc_div_2si
- Speed-ups
. mpc_fma
- Bug fixes
. mpc_div and mpc_norm now return a value indicating the effective
rounding direction, as the other functions.
. mpc_mul, mpc_sqr and mpc_norm now return correct results even if
there are over- or underflows during the computation.
. mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
infinite part and equals output variable is corrected.
. mpc_fr_sub: Wrong return value for imaginary part is corrected.
Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.
Bump PORTREVISIONS of all dependent ports.
PR: 183141
Approved by: portmgr (bdrewery)
${PORTSDIR} to ${.CURDIR}/../.. in the .include for bsd.octave.mk.
This is because USE_GMAKE no longer works after .include <bsd.ports.pre.mk>.
- Trim headers.
- Clean whitespace.
- Portlint.
since there was an API change to octave (from 3.4 to 3.6).
Now it is appropriate to bump the portrevision of every single octave-forge port,
but a few of the ports needed further patches to make them work: ad,
communications, parallel, odepkg. The es package doesn't build so we switched off.
Submitted by: stephen@
Reviewed by: maho@
release system they have is creating releases that don't quite fit into the
old paradigm. A big difference is that they don't all use configure any more.
This moves all the "GNU_CONFIGURE=yes" stuff from bsd.octave.mk to the
individual ports.
PR: 144512
Submitted by: Stephen Montgomery-Smith <stephen@missouri.edu> (maintainer)
This is msh.
Package for creating and managing triangular and tetrahedral meshes for
Finite Element or Finite Volume PDE solvers. Uses a mesh data structure
compatible with pdetool. Relies on gmsh for unstructured mesh generation.
The octave-forge package is the result of The GNU Octave Repositry project,
which is intended to be a central location for custom scripts, functions and
extensions for GNU Octave. contains the source for all the functions plus
build and install scripts.
PR: 127030
Submitted by: Stephen Montgomery-Smith <stephen@math.missouri.edu>
