* devel/gnustep-make: Update to 2.8.0
* lang/gnustep-base: Update to 1.27.0
* x11-toolkits/gnustep-back: update to 0.28.0
* x11-toolkits/gnustep-gui: update to 0.28.0
Also bump PORTREVISION on dependent ports.
* Bump the LLVM revision used for GNUstep to 7, the minimum to support
the new ABI.
* GNUstep-back does not work with lld, so mark it to use Gold (BFD LD
doesn't seem able to link Objective-C things).
* Turn off some annoying debug logs in GNUstep back, which generate
several messages per second when you move the mouse. These should
never have been enabled in a release build anyway.
* Downgrade Cenon to 4.0.2. This was the last version to actually work
with GNUstep (the later ones use XCode >= 5 .xib files, which GNUstep
can't parse).
* Update gorm to git head. The current release doesn't work with the
new Objective-C ABI, but -head has the patches to fix it.
* Update PikoPixel and add it to the gnustep-app meta-package.
* Update the three core GNUstep packages to the latest release.
* Update gnumail and pantomime to the latest release and fix a linking
error with the new ABI.
* Update GNUstep FTP to the latest version.
Reviewed by: bapt (previous version)
We were not setting the flag to select the GNUstep ABI, so were defaulting to
using the GCC-compatible version, which was likely to trigger a lot of subtle
bugs. This was noticed when C++ exceptions thrown through Objective-C stack
frames caused segfaults.
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
Update the default Objective-C compiler.
Fix various build failures in GNUstep ports from newer versions of the GNUstep
core libraries and from changes to GNUstep Make.
Update various ports that use GNUstep and bump the portrevision of the ones
that haven't had a new release.
- Clean up the Makefile.
- Follow some upstream recommendations (--with-data-packaging=archive,
--disable-renaming, -DICU_NO_USER_DATA_OVERRIDE).
- Patch makefiles to install static libraries with INSTALL_DATA so they
aren't stripped.
- Patch config/mh-bsd-gcc to sync with config/mh-linux-gcc.
- Fix endianness detection in ICU. The code wanted to use BYTE_ORDER
defined in machine/endian.h, but this isn't visible because ICU is
compiled with _XOPEN_SOURCE. Patch the code to use _BYTE_ORDER instead.
- Compile ICU with C++11 compiler to enable move constructors.
- Patch ICU to fix a problem with atomics in the case of a C++11 compiler
without C++11 header <atomic> (like Clang on FreeBSD 9).
- Bump all ports that depend on it due to library version change.
- Add USES=compiler:c++0x to some ports that pick up -std=c++0x from ICU
pkgconfig files.
- Add USES=compiler:c++11-lib to graphics/libcdr01 because it also needs
a C++11 runtime library now. Add this to all ports that depend on it
so their executables load the right libstdc++.so on FreeBSD 9.
PR: 205120
Exp-run by: antoine
Approved by: portmgr (antoine)
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
print/cups and update it to 2.1.3. Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.
Long description:
First some background. When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain. Costs used to be configured in such a way that files were
first converted to PostScript. This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers. Nowadays most filters
have been moved from cups to cups-filters and they have been configured to
use PDF as an intermediate format instead of PostScript.
Merging of cups-base, cups-client and cups-image into print/cups:
- cups-image provides a library to work with the cups raster format. It is
only used to implement filters and printer drivers and these only exist
in the context of a cups server so there's no need to separate this from
cups-base.
- cups-client provides a library that allows applications to print via cups.
It is possible to use the library to access a remote cups server without
running a local cups server, but such a setup is discouraged and the
configuration file to set this up has been marked deprecated. It is
better to run a local cups server and let that talk to the remote cups
server because then you have the benefits of local job queuing in case the
remote server is down or busy. Given this and the fact that without
filters cups-base is now smaller than it used to be it makes sense to
merge the ports. The patch also adds options IPPTOOL, DOCS and NLS which
when disabled make the new cups package smaller than the current
cups-client package. Merging the ports also prevents problems with
options like ZEROCONF being configured differently in both ports.
- print/cups was a metaport that depended on cups-base and some filters.
There isn't really a need for such a metaport so cups-base can be renamed
to cups. The filters can be depended on by printer drivers such as hplip
if they need them.
Additional changes to the new print/cups:
- Clean up the patches. They seem to have been regenerated with post-patch
changes included.
- Add a patch to prevent intermediate conversion to PDF when a PostScript
file is sent to a PostScript printer when cups-filters is installed.
- Fix the PAM configuration file.
- Add a patch to let the server search /usr/local/share/ppd like on Linux so
other ports don't have to add links to it.
- Remove ulpt(4) helper scripts. The port uses libusb with ugen(4).
- Remove support for mDNSResponder. cups-filters only supports Avahi.
- Combine ICONS and XDG_OPEN options into an X11 option to support WITHOUT_X11.
- Optionally depend on colord for ICC profile support.
- Various smaller changes.
Changes to print/cups-filters:
- Let the cups_browsed rc.d script depend on cupsd and avahi_daemon instead
of LOGIN.
- Development of foomatic-filters has been moved to cups-filters so let this
port install foomatic related files and add foomatic-filters to CONFLICTS.
- Fix location of liblouis tables.
- Add patch to fix ICC support.
Changes to print/cups-pstoraster:
This port is essentially an old version of Ghostscript plus a cups filter.
It's no longer developed. This commit removes it and changes existing
dependencies to print/cups-filters which depends on print/ghostscript* and
includes a gstoraster filter that can handle both PostScript and PDF.
Changes to print/foomatic-db*:
Remove old MASTER_SITES and dependencies and eliminate PKGNAMEPREFIX.
Changes to print/foomatic-filters:
Install beh backend with its original name again and add cups-filters to
CONFLICTS.
Changes to print/hplip:
- Stop installing hpijs/foomatic-rip support. This is no longer supported
upstream.
- Stop installing hpcups PPDs. These are now automatically generated. The
bundled PPDs are generated for an older version of cups.
- Rename the QT option to X11 to support WITHOUT_X11.
- Simplify the patches now that ports are installed in a staging area.
- Add a patch to set SO_REUSEPORT (next to SO_REUSEADDR) on the mDNS socket
like avahi-daemon does. This fixes Zeroconf support for HP network
printers.
PR: 207746
Exp-run by: antoine
Approved by: portmgr (antoine)
Some ports were already installing in the System domain, for these just remove the Makefile lines explicitly specifying the install domain.
The rest are installed in the Local domain, remove any overrides, update their pkg-plists and any explicit paths in the Makefiles and then bump port revision.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D2977
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Simplify gnustep ports
Hook into the regular ports framework:
- LIB_DEPENDS for library dependencies
- Use regular USE_LDCONFIG
Reuse USES=objc (automatic)
USE_GNUSTEP is now a macro to set the dependencies and build feature needed.
Accepted arguments: back base build gui
Merge deskutils/preferencepanes into deskutils/systempreferences
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version. When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.
Also remove the devel/pcre dependency from USE_GNOME=glib20. It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it. The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20. Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.
PR: 195724
Exp-run by: antoine
Approved by: portmgr (antoine)
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.
PR: 192342
Approved by: portmgr (implicit, bump unstaged ports)
