Please refer to the 20200811 UPDATING entry when upgrading
dependent (*-emacs26-*) ports.
Port changes:
- depend on math/gmp
- match upstream by turning CAIRO, HARFBUZZ, and JSON options and on and
turning MAGICK off by default
- remove OPENMP check for graphics/ImageMagick as the openmp is now
included in base
- update EMACS_VER in Mk/Uses/emacs.mk
- bump USES=emacs ports or remove BROKEN for net-im/jabber.el and
deskutils/howm, which now build
Submitted by: HIROSE Yuuji <yuuji@gentei.org> (canna patch)
Reviewed by: ashish
Differential Revision: https://reviews.freebsd.org/D23966
This update includes an Emacs major version change from 27.0.50 to 28.0.50.
Ports that may depend on editors/emacs-devel must chase this update
with a PORTREVISION bump.
Submitted by: ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D23012
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
- Mew now supports Emacs 24.3 or later only
- Supporting stunnel 5.
- Supporting GnuPG 2.1.23 or later.
The command name should be "gpg" instead of "gpg2".
Put the following to your "~/.gnupg/gpg.conf".
no-auto-key-retrieve
auto-key-locate local
- Using LibreOffice (soffice) on Unix by default
- Regenerate patches to fix portlint warnings.
PR: 228861
Submitted by: Yasuhiro KIMURA <yasu@utahime.org>
Approved by: hiroto.kagotani@gmail.com (maintainer timeout)
Relnotes: http://www.mew.org/en/relnote/release.html
- Convert USE_EMACS to USES=emacs
- Remove editors/emacs-nox11 (refer to nox flavors of editors/emacs and
editors/emacs-devel)
- Permit default Emacs flavor to be specified in make.conf
- Rename japanese/migemo-emacs23 to japanese/migemo-emacs
- Update and simplify audio/emms and fix build on FreeBSD 10 [1]
- Update databases/bbdd and fix build on FreeBSD 10 [1]
- Update editors/emacs-devel
- Ensure Makefile shell commands that change directory are executed in a
subshell
- Silence some portlint warnings
[1] By not depending on base texinfo
PR: 225404
Reviewed by: antoine
Approved by: portmgr (mat) ashish (maintainer)
Differential Revision: https://reviews.freebsd.org/D13506
locale set by the user. Add LANG=C and LC_ALL=C at the beginning of
bsd.port.mk and export them so all commands are executed with the C locale.
LC_ALL=C overrides all other LC_* variables. LANG is used by setlocale(3)
as default value for LC_* variables, so normally it isn't used when LC_ALL
is set, but there's code out there that looks at LANG directly so it's safer
to set it as well. The only commands not captured by this are !=
assignments before any inclusion of bsd.port.*mk.
Introduce USE_LOCALE=<locale> that adds LANG=<locale> and LC_ALL=<locale> to
CONFIGURE_ENV and MAKE_ENV so upstream build systems can be executed with a
different locale (e.g. USE_LOCALE=en_US.UTF-8).
PR: 215882
Exp-run by: antoine
Approved by: portmgr (antoine)
* supporting GnuPG 2.1 for master password.
* stop using discard-input.
* Fix mew-scan-body() chips the last byte of the base64 decoded body
* Match exactly on an email address to specify a user ID to GnuPG
* Do not use exit|return with negative status code to fix bashism
* Remove the trailing whitespace of w3m
This whitespace was causing lines to wrap even when the text itself
was correctly wrapped to the window width.
* Drag and drop improvement in Windows environment
UNC path files can be attached to draft mode by drag and drop.
* updating auxiliary.el
* Choose last preferred part in multipart/alternative
* Increase mew-header-reasonable-size to 10000
* mew-summary-refile-report: Show warning when mew-header-reasonable-size
does not cover the header of the selected message.
Approved by: Hiroto Kagotani (maintainer)
- Remove %%PORTDOCS%% in pkg-plist and use PORTDOCS in Makefile instead.
- Fix a wrong pathname in pkg-message.
- Use {opt}_* variables instead of ".if ${PORT_OPTIONS:Mfoo}".
- Remove patch-Makefile.in because it is no longer needed.
Approved by: hiroto.kagotani@gmail.com (maintainer)
editors/emacs:
- Update to 24.3
- Update CANNA patchset[1]
- Unbreak ARM support by using the patch from emacs-devel port
- Add missing INSTALLS_ICONS[2]
- Remove a patch which is already integrated upstream
- Fix Makefile header
editors/emacs-devel:
- Update to bzr revision 112178
- Fix Makefile header
- Add missing INSTALLS_ICONS[2]
editors/emacs23:
- Remove ABI versions from LIB_DEPENDS
- Fix Makefile header
- Add missing INSTALLS_ICONS[2]
Mk/bsd.emacs.mk:
- Update major version for editors/emacs port
*:
- Bump PORTREVISION to chase Emacs updates
PR: ports/177428[2]
Submitted by: Yuji TAKANO[1] (via private email), bdrewery[2]
PR/137956 by Ashish SHUKLA (thanks!). [1]
Those ports which define EMACS_PORT_NAME to be "emacs21" were
not touched (this time). They may be converted to the new
world order by removing the above mentioned assignment.
Four ports were marked as BROKEN with EMACS_PORT_NAME=emacs23
(they do not compile):
. lang/bigloo;
. mail/wanderlust;
. mail/wanderlust-devel;
. www/emacs-w3m.
Three ports were marked as IGNORE with EMACS_PORT_NAME=emacs23:
. japanese/egg-canna (the port version is dated as of 2001,
does not compile with Emacs 23 and seems it cannot be fixed);
. deskutils/remember.el (was incorporated into Emacs 23);
. editors/nxml (was incorporated into Emacs 23).
Changes that were made after (and as a result of) exp run. For
those ports:
. japanese/migemo-emacs21;
. japanese/migemo-emacs22
EMACS_PORT_NAME?= was changed to EMACS_PORT_NAME= to the apropriate
emacs port name.
PR: ports/137956 [1], ports/141369 [2]
Submitted by: Ashish SHUKLA <wahjava at gmail.com> [1],
bsam (me) [2]
Exp-run by: miwi
- Fix MASTER_SITES.
- Remove redundant DOCSDIR and CONFIGURE_TARGET.
- Use EMACS_LIBDIR for non-lisp files for consistency.
- Use --with-elispdir for EMACS_SITE_LISPDIR.
- Separate the Japanese info files by using NOPORTDOCS.
- The mew-icon-directory variable is set automatically
even in XEmacs now.
Approved by: Hiroto Kagotani (maintainer)
PR: ports/107438
EMACS ports. [1]
- Allow building a port as root using an NFS-mounted /usr/ports if the
server maps root to a UID other than root. [2]
- Make 'BROKEN' and 'IGNORED' ports exit their "make install" with a fail
status rather than success. [3]
- Improve behavior when dealing with versioned dependencies. [4]
- Fix false positives in check-conflicts target. [5]
- Remove obsolete bzip2 code. [6]
- Add physical category net-p2p. [7]
- Don't fetch INDEXFILE if not necessary; respect FETCH_ENV. [8], [11]
- INDEX can now be moved outside of ports tree. [9]
- Add ghostscript-gpl. [10]
- Remove obsolete USE_MESA. [12]
- Force pkg_install tools from ports on FreeBSD 4.10 and older. [13]
- Document ALWAYS_KEEP_DISTFILES. [14]
- Remove USE_REINPLACE from bsd.port.mk USE_DOS2UNIX patch. [15]
PR: ports/37596 [1], ports/57259 [2], ports/63216 [3],
ports/89448 [4], ports/89710 [5], ports/88996 [6],
ports/89260 [7], ports/89363 [8], ports/89809 [9],
ports/89853 [10], ports/91086 [11], ports/91710 [12],
ports/91727 [13], ports/92111 [14], ports/92124 [15]
Submitted by: Jay Sachs <jay at eziba dot com> [1], sem [1, 3, 8, 12],
Andrew Heybey <ath at niksun dot com> [2], Jamie Jones
<jamie at thompson dot bishopston dot net>, tobez [4], Mark
Andrews <Mark_Andrews at isc dot org> [5], edwin [6, 11, 15],
pav [7, 13], Peter Jeremy <PeterJeremy at optushome dot com
dot au> [9], Ulrich Spoerlein <q at galgenberg dot net> [10],
netchild [11], erwin [14]
Reviewed by: kris, clement (partially)
