- Add rc.d script for flow-fanout

- Bump PORTREVISION.

net-mgmt/flow-tools/Makefile

@@ -7,7 +7,7 @@
 
 PORTNAME=	flow-tools
 PORTVERSION=	0.68
-PORTREVISION=	3
+PORTREVISION=	4
 CATEGORIES=	net-mgmt
 MASTER_SITES=	ftp://ftp.eng.oar.net/pub/flow-tools/
 
@@ -33,7 +33,7 @@ SUB_LIST=	FLOW_CAPTURE_SPOOL="${FLOW_CAPTURE_SPOOL}" \
 		FLOW_CAPTURE_UID="${FLOW_CAPTURE_UID}" \
 		FLOW_CAPTURE_GID="${FLOW_CAPTURE_GID}" \
 		FLOW_CAPTURE_PIDDIR="${FLOW_CAPTURE_PIDDIR}"
-USE_RC_SUBR=	flow_capture
+USE_RC_SUBR=	flow_capture flow_fanout
 
 VARDIR?=		${DESTDIR}/var
 FLOW_CAPTURE_SPOOL=	${VARDIR}/db/flows

net-mgmt/flow-tools/files/flow_fanout.in

@@ -0,0 +1,105 @@
+#!/bin/sh
+#
+# $FreeBSD$
+#
+
+# PROVIDE: flow_fanout
+# REQUIRE: DAEMON
+# KEYWORD: shutdown
+
+#
+# Add the following line to /etc/rc.conf to enable flow-fanout:
+# flow_fanout_enable (bool):	Set it to "YES" to enable flow-fanout daemon.
+#				Set to "NO" by default.
+# flow_fanout_ip (str):		IP address to bind to
+#				Default to "0.0.0.0"
+# flow_fanout_remoteip (str):	IP address to accept flows from
+#				Default to "0.0.0.0" or all IPs
+# flow_fanout_port (int):	Port to accept flow data on
+#				Default is "8787"
+# flow_fanout_export (str):	Where to send flows to. Default is "0/0/8788"
+# flow_fanout_flags (str):	Custom additional arguments to be passed
+#				to flow-collector (default "").
+# flow_fanout_profiles (str):	A list of configuration	profiles to enable.
+#				This allows you	to run several instances of
+#				flow-fanout with different parameters.
+#				Consider the following example:
+#				flow_fanout_enable="YES"
+#				flow_fanout_ip="85.172.168.9"
+#				flow_fanout_profiles="r1 r2"
+#				flow_fanout_r1_port="4444"
+#				flow_fanout_r1_export="0/0/9500 0/10.5.5.5/9200"
+#				flow_fanout_r2_port="4445"
+#				flow_fanout_r2_export="0/0/9551 0/0/9101"
+#
+#				This will run two instances of the flow-fanout
+#				with parameters taken from appropriate
+#				flow_fanout_PROFILENAME_xxx variables. For
+#				unspecified parameters flow_fanout_xxx
+#				varialbes will be used.
+
+. /etc/rc.subr
+
+name="flow_fanout"
+rcvar=`set_rcvar`
+
+setup_profile_vars()
+{
+	name=flow_fanout_$1
+	eval ": \${flow_fanout_${1}_ip=${flow_fanout_ip}}"
+	eval ": \${flow_fanout_${1}_remoteip=${flow_fanout_remoteip}}"
+	eval ": \${flow_fanout_${1}_port=${flow_fanout_port}}"
+	eval ": \${flow_fanout_${1}_export=${flow_fanout_export}}"
+	eval ": \${flow_fanout_${1}_flags=${flow_fanout_flags}}"
+	eval "pidfile=${flow_fanout_pid}.\${flow_fanout_${1}_port}"
+	eval "command_args=\"-p ${flow_fanout_pid} \${flow_fanout_${1}_ip}/\${flow_fanout_${1}_remoteip}/\${flow_fanout_${1}_port} \${flow_fanout_${1}_export}\""
+}
+
+start_profiles()
+{
+	unset start_cmd
+	for _profile in ${flow_fanout_profiles}; do
+		setup_profile_vars $_profile
+		run_rc_command "${rc_arg}"
+	done
+}
+
+stop_profiles()
+{
+	unset stop_cmd
+	for _profile in ${flow_fanout_profiles}; do
+		setup_profile_vars $_profile
+		run_rc_command "${rc_arg}"
+	done
+}
+
+load_rc_config $name
+
+: ${flow_fanout_enable="NO"}
+: ${flow_fanout_ip="0.0.0.0"}
+: ${flow_fanout_remoteip="0.0.0.0"}
+: ${flow_fanout_port="8787"}
+: ${flow_fanout_export="0/0/8788"}
+: ${flow_fanout_pid="%%FLOW_CAPTURE_PIDDIR%%/flow-fanout.pid"}
+: ${flow_fanout_user="flowtools"}
+: ${flow_fanout_group="flowtools"}
+: ${flow_fanout_flags=""}
+
+pidfile="${flow_fanout_pid}.${flow_fanout_port}"
+
+command="%%PREFIX%%/bin/flow-fanout"
+command_args="-p ${flow_fanout_pid} ${flow_fanout_ip}/${flow_fanout_remoteip}/${flow_fanout_port} ${flow_fanout_export}"
+
+cmd="$1"
+if [ $# -gt 0 ]; then
+	shift
+fi
+
+[ -n "$*" ] && flow_fanout_profiles="$*"
+
+if [ "${flow_fanout_profiles}" ]; then
+	start_cmd="start_profiles"
+	stop_cmd="stop_profiles"
+fi
+
+run_rc_command "$cmd"