diff --git a/sysutils/Makefile b/sysutils/Makefile
index 5b8278b70517..ab56d5d32363 100644
--- a/sysutils/Makefile
+++ b/sysutils/Makefile
@@ -1173,6 +1173,7 @@
     SUBDIR += u-boot-cubieboard2
     SUBDIR += u-boot-cubox-hummingboard
     SUBDIR += u-boot-duovero
+    SUBDIR += u-boot-imx-serial-loader
     SUBDIR += u-boot-master
     SUBDIR += u-boot-olimex-a20-som-evb
     SUBDIR += u-boot-olinuxino-lime
diff --git a/sysutils/u-boot-imx-serial-loader/Makefile b/sysutils/u-boot-imx-serial-loader/Makefile
new file mode 100644
index 000000000000..9b168aa059e7
--- /dev/null
+++ b/sysutils/u-boot-imx-serial-loader/Makefile
@@ -0,0 +1,22 @@
+# Created by: Ian Lepore <ian@FreeBSD.org>
+# $FreeBSD$
+
+PORTNAME=	u-boot-imx-serial-loader
+PORTVERSION=	2017.01
+CATEGORIES=	sysutils
+
+MAINTAINER=	ian@FreeBSD.org
+COMMENT=	Load u-boot via USB or UART on i.MX5, i.MX6, i.MX7, and Vybrid
+
+LICENSE=	LGPL21
+
+USE_GITHUB=	yes
+GH_ACCOUNT=	boundarydevices
+GH_PROJECT=	imx_usb_loader
+GH_TAGNAME=	ba6b31c
+
+USES=		gmake pkgconfig
+
+MAKE_ARGS+=	prefix=${PREFIX}
+
+.include <bsd.port.mk>
diff --git a/sysutils/u-boot-imx-serial-loader/distinfo b/sysutils/u-boot-imx-serial-loader/distinfo
new file mode 100644
index 000000000000..1c14413126f0
--- /dev/null
+++ b/sysutils/u-boot-imx-serial-loader/distinfo
@@ -0,0 +1,3 @@
+TIMESTAMP = 1498334706
+SHA256 (boundarydevices-imx_usb_loader-2017.01-ba6b31c_GH0.tar.gz) = a4bc518e4ddcb6e63ec6267d7e936d4099ded0af911c96f249060d208b14fa11
+SIZE (boundarydevices-imx_usb_loader-2017.01-ba6b31c_GH0.tar.gz) = 37621
diff --git a/sysutils/u-boot-imx-serial-loader/pkg-descr b/sysutils/u-boot-imx-serial-loader/pkg-descr
new file mode 100644
index 000000000000..12658a59df92
--- /dev/null
+++ b/sysutils/u-boot-imx-serial-loader/pkg-descr
@@ -0,0 +1,11 @@
+This program boots an i.MX or Vybrid system using a copy of U-Boot
+transferred to the system over an OTG or UART connection.  It can be
+used to "unbrick" a system which has a corrupted or missing copy of
+U-Boot in nonvolatile media such as nand flash or eeprom.  i.MX systems
+use the OTG port, Vybrid systems use the UART port.
+
+To use this, connect the OTG port of your i.MX board to a USB host
+port on your computer, power on the board, then run imx_usb <filename>
+where filename is the board-specific u-boot.imx file to boot with.
+
+WWW: https://github.com/boundarydevices/imx_usb_loader
diff --git a/sysutils/u-boot-imx-serial-loader/pkg-plist b/sysutils/u-boot-imx-serial-loader/pkg-plist
new file mode 100644
index 000000000000..e8e229e78183
--- /dev/null
+++ b/sysutils/u-boot-imx-serial-loader/pkg-plist
@@ -0,0 +1,9 @@
+bin/imx_uart
+bin/imx_usb
+etc/imx-loader.d/imx_usb.conf
+etc/imx-loader.d/mx50_usb_work.conf
+etc/imx-loader.d/mx51_usb_work.conf
+etc/imx-loader.d/mx53_usb_work.conf
+etc/imx-loader.d/mx6_usb_work.conf
+etc/imx-loader.d/mx7_usb_work.conf
+etc/imx-loader.d/vybrid_usb_work.conf