- rework pkg-install and pkg-message [1]

- install postfix specific mailer.conf.postfix into DATADIR [2]

- use new notation instead PATCH_DIST_STRIP

- bump PORTREVISION

1) detect if the port is installed without TERM, in this case
   do not ask the to make postfix the default mailer and respect
   the env POSTFIX_DEFAULT_MTA. This helps tools like salt,
   ansible, cfengine and puppet during the first package installation.

2) $DATADIR/mailer.conf.postfix can be used by the tools in 1)

MFH:		2016Q1

mail/postfix/Makefile

@@ -3,6 +3,7 @@
 
 PORTNAME=	postfix
 PORTVERSION=	2.11.7
+PORTREVISION=	1
 PORTEPOCH=	1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	ftp://ftp.porcupine.org/mirrors/postfix-release/ \
@@ -122,7 +123,7 @@ DAEMONDIR=	${PREFIX}/libexec/postfix
 
 SUB_LIST+=	REQUIRE="${_REQUIRE}" READMEDIR="${READMEDIR}" \
 		DAEMONDIR="${DAEMONDIR}"
-SUB_FILES+=	pkg-install pkg-message
+SUB_FILES+=	pkg-install pkg-message mailer.conf.postfix
 
 POSTFIX_CCARGS+=	-DDEF_CONFIG_DIR=\\\"${ETCDIR}\\\" \
 			-DDEF_DAEMON_DIR=\\\"${DAEMONDIR}\\\" \
@@ -181,8 +182,7 @@ POSTFIX_CCARGS+=	-DNO_TLS
 
 .if ${PORT_OPTIONS:MSPF}
 PATCH_SITES+=		LOCAL/mm
-PATCHFILES+=		postfix-2.8.0-libspf2-1.2.x-0.patch.gz
+PATCHFILES+=		postfix-2.8.0-libspf2-1.2.x-0.patch.gz:-p1
-PATCH_DIST_STRIP=	-p1
 POSTFIX_CCARGS+=	-DHAVE_NS_TYPE -DHAS_SPF -I${LOCALBASE}/include
 POSTFIX_AUXLIBS+=	-L${LOCALBASE}/lib -lspf2
 .endif
@@ -237,9 +237,8 @@ _REQUIRE+=		ypserv
 .endif
 
 .if ${PORT_OPTIONS:MVDA}
-PATCH_SITES+=		http://vda.sourceforge.net/VDA/:vda
+PATCH_SITES+=		http://vda.sourceforge.net/VDA/:-p1:vda
 PATCHFILES+=		postfix-vda-v13-${VDAVERSION}.patch:vda
-PATCH_DIST_STRIP=	-p1
 .endif
 
 .if ${PORT_OPTIONS:MTEST}
@@ -348,6 +347,8 @@ post-stage:
 # == do not overwrite existing config
 	${MV} ${STAGEDIR}${ETCDIR}/main.cf ${STAGEDIR}${ETCDIR}/main.cf.sample
 	${MV} ${STAGEDIR}${ETCDIR}/master.cf ${STAGEDIR}${ETCDIR}/master.cf.sample
+	${MKDIR} ${STAGEDIR}${DATADIR}
+	${INSTALL_DATA} ${WRKDIR}/mailer.conf.postfix ${STAGEDIR}${DATADIR}
 
 # Fix compressed man pages and strip executables
 	${SED} -i '' -E -e "s|(man[158]/.*.[158]):|\1.gz:|g" ${STAGEDIR}${DAEMONDIR}/postfix-files

mail/postfix/files/mailer.conf.postfix.in

@@ -0,0 +1,7 @@
+#
+# Execute the Postfix sendmail program, named %%PREFIX%%/sbin/sendmail
+#
+sendmail	%%PREFIX%%/sbin/sendmail
+send-mail	%%PREFIX%%/sbin/sendmail
+mailq		%%PREFIX%%/sbin/sendmail
+newaliases	%%PREFIX%%/sbin/sendmail

mail/postfix/files/pkg-install.in

@@ -7,13 +7,17 @@
 # will make the port/package use defaults which make postfix replace
 # sendmail as much as possible.
 
-PREFIX=${PKG_PREFIX:=%%PREFIX%%}
+# allowed vars during package installation
-ETCDIR=${ETCDIR:=%%ETCDIR%%}
-DAEMONDIR=${DAEMONDIR:=%%DAEMONDIR%%}
-READMEDIR=${READMEDIR:=%%READMEDIR%%}
 BATCH=${BATCH:=no}
 POSTFIX_DEFAULT_MTA=${POSTFIX_DEFAULT_MTA:=no}
-MC=/etc/mail/mailer.conf
+
+# fixed vars
+PREFIX="%%PREFIX%%"
+ETCDIR="%%ETCDIR%%"
+DAEMONDIR="%%DAEMONDIR%%"
+READMEDIR="%%READMEDIR%%"
+MCP="%%DATADIR%%/mailer.conf.postfix"
+MC="/etc/mail/mailer.conf"
 
 if [ "${POSTFIX_DEFAULT_MTA}" = "no" ]; then
       DEFAULT_REPLACE_MAILERCONF=n
@@ -21,12 +25,6 @@ else
       DEFAULT_REPLACE_MAILERCONF=y
 fi
 
-if [ -x /usr/sbin/nologin ]; then
-      NOLOGIN=/usr/sbin/nologin
-else
-      NOLOGIN=/sbin/nologin
-fi
-
 ask() {
       local question default answer
 
@@ -56,6 +54,25 @@ yesno() {
       done
 }
 
+install_mailer_conf() {
+	echo "Activate Postfix in ${MC}"
+	/bin/mv -f ${MC} ${MC}.old
+	/usr/bin/install -m 644 ${MCP} ${MC}
+}
+
+show_not_activated_msg() {
+	echo
+	echo "==============================================================="
+	echo "Postfix was *not* activated in /etc/mail/mailer.conf! "
+	echo
+	echo "To finish installation run the following commands:"
+	echo
+	echo "  mv ${MC} ${MC}.old"
+	echo "  install -m 0644 ${MCP} ${MC}"
+	echo "==============================================================="
+	echo
+}
+
 if [ "$2" = "POST-INSTALL" ]; then
 	/bin/sh ${DAEMONDIR}/post-install tempdir=/tmp \
 	 daemon_directory=${DAEMONDIR} \
@@ -71,18 +88,22 @@ if [ "$2" = "POST-INSTALL" -a -z "${PACKAGE_BUILDING}" -a -f "${MC}" ]; then
 	egrep -q "^newaliases.*${PREFIX}/sbin/sendmail"  ${MC}
 	ret=$?
 	if [ ${ret} -ne 0 ]; then
-		if yesno "Would you like to activate Postfix in ${MC}" ${DEFAULT_REPLACE_MAILERCONF}; then
+		# Respect POSTFIX_DEFAULT_MTA, do not ask for confirmation!
-			/bin/mv -f ${MC} ${MC}.old
+		# (This helps tools like salt, ansible or puppet on new installations)
-			echo "#"						>	${MC}
+		if [ "${DEFAULT_REPLACE_MAILERCONF}" = "y" ]; then
-			echo -n "# Execute the Postfix sendmail program"	>>	${MC}
+			install_mailer_conf
-			echo ", named ${PREFIX}/sbin/sendmail"			>>	${MC}
+		elif [ "${DEFAULT_REPLACE_MAILERCONF}" = "n" -a -t 0 ]; then
-			echo "#"						>>	${MC}
+			if yesno "Would you like to activate Postfix in ${MC}" ${DEFAULT_REPLACE_MAILERCONF:="n"}; then
-			echo "sendmail	${PREFIX}/sbin/sendmail"	>>	${MC}
+				install_mailer_conf
-			echo "send-mail	${PREFIX}/sbin/sendmail"	>>	${MC}
+			else
-			echo "mailq		${PREFIX}/sbin/sendmail"	>>	${MC}
+				show_not_activated_msg
-			echo "newaliases	${PREFIX}/sbin/sendmail"	>>	${MC}
 			fi
 		else
+			show_not_activated_msg
+		fi
+	else
+		echo "==============================================================="
 		echo "Postfix already activated in ${MC}"
+		echo "==============================================================="
 	fi
 fi

mail/postfix/files/pkg-message.in

@@ -1,27 +1,25 @@
-To enable postfix startup script please add postfix_enable="YES" in
+To use postfix instead of sendmail:
-your rc.conf
+  - clear sendmail queue and stop the sendmail daemons
 
-If you not need sendmail anymore, please add in your rc.conf:
+Run the following commands to enable postfix during startup:
+  - sysrc postfix_enable="YES"
+  - sysrc sendmail_enable="NONE"
 
-sendmail_enable="NO"
+If postfix is *not* already activated in /etc/mail/mailer.conf
-sendmail_submit_enable="NO"
+  - mv /etc/mail/mailer.conf /etc/mail/mailer.conf.old
-sendmail_outbound_enable="NO"
+  - install -m 0644 %%DAEMONDIR%%/mailer.conf.postfix /etc/mail/mailer.conf
-sendmail_msp_queue_enable="NO"
 
-And you can disable some sendmail specific daily maintenance routines in your
+Disable sendmail(8) specific tasks,
-/etc/periodic.conf file:
+add the following lines to /etc/periodic.conf(.local):
-
+  daily_clean_hoststat_enable="NO"
-daily_clean_hoststat_enable="NO"
+  daily_status_mail_rejects_enable="NO"
-daily_status_mail_rejects_enable="NO"
+  daily_status_include_submit_mailq="NO"
-daily_status_include_submit_mailq="NO"
+  daily_submit_queuerun="NO"
-daily_submit_queuerun="NO"
-
-If /etc/periodic.conf does not exist please create it and add those values.
 
 If you are using SASL, you need to make sure that postfix has access to read
 the sasldb file.  This is accomplished by adding postfix to group mail and
 making the %%PREFIX%%/etc/sasldb* file(s) readable by group mail (this should
 be the default for new installs).
 
-If you are upgrading from Postfix 2.6 or earlier, review the RELEASE_NOTES to
+If you are upgrading from prior postfix version, review the RELEASE_NOTES to
 familiarize yourself with new features and incompatabilities. 

mail/postfix/pkg-plist

@@ -137,6 +137,7 @@ sbin/postmulti
 sbin/postsuper
 sbin/posttls-finger
 sbin/sendmail
+%%DATADIR%%/mailer.conf.postfix
 @dir %%PFETC%%
 @dir(postfix,,700) /var/db/postfix
 @dir(postfix,,700) /var/spool/postfix/active